Siser Heat Transfer Vinyl hi-5

PU plotter cut heat seal material with adhesive polyester backing for low temperature and time of transfer.
The material is thin, elastic, soft to the hand and blends well into the textiles. Specifically conceived for polyester based “technical” fabrics eventually mixed with an addition of cotton and elastic fibres.
Low temperature application prevents undesirable effects such as glossiness, fibre damaging and decrease or loss of some of the specific features of the textile.

P.S. Film is certified Öko-Tex Standard 100 class I

Technical data
film PU plotter cut heat seal material
spessore Average thickness 90 micron
press Recommended pressure 50gf
lama New at 50
Application instructions
15sec 5 sec.
temp Temperature: 120 °C (250°F) or 150 °C (302°F) for multilayer applications or thick cotton
pres High pressure (4/5 bar)
peel Warm / Cold
Washing instructions
wash Wait 24h after the heat transfer
dry No dry clean
lavaggio Max 60°
fan Tumble dry: yes
cand Do not use bleach or other aggressive chemical agents
Suitable textiles
cotone 100%  Cotton
poly Elastan, 100% Polyester
misto  Cotton, polyester, Elastan and blends of these materials (not suited for treated and dye sublimation fabrics)